ROC Windscreen Banner | Ranger Owners Club

ROC Windscreen Banner | Ranger Owners ClubSPECS Black Backing sold separately "RANGEROWNERSCLUB" text 1140mm x 50mm Please note RANGER pictured is the white RANGEROWNERSCLUB overlay without the black backing (sold separately). VINYL Premium grade HEXIS automotive vinyl (Skintac HX20000) UV & weather resistant Clean surface and ensure the surface is cool prior to application INSTALLATION Ensure your windscreen has been cleaned thoroughly. Wax & Grease remover or Glass Cleaner is recommended.

• Black Backing sold separately
• "RANGEROWNERSCLUB" text - 1140mm x 50mm
• Please note - RANGER pictured is the white RANGEROWNERSCLUB overlay without the black backing (sold separately).

VINYL

• Premium grade HEXIS automotive vinyl (Skintac HX20000)
• UV & weather resistant
• Clean surface and ensure the surface is cool prior to application

INSTALLATION

1. Ensure your windscreen has been cleaned thoroughly.  Wax & Grease remover or Glass Cleaner is recommended.
   
   
2. The windscreen must be cool to touch and out of direct sunlight (this will assist with adhesion)
   
   
3. BLACK BACKING - lay the black backing over the top of your windscreen (One person on each side is recommended - keep tension).  There will be slight excess over the top of your windscreen and left and right side. Slowly position the vinyl and press the air out towards one area.  Use a card with a microfibre cloth around it to slowly smooth over the vinyl.
   
   
4. Use a sharp blade and lightly cut around the excess vinyl.
   
   
5. Create a centre point marking with a piece of masking tape on your black vinyl backing. Mark the centre point on your RANGEROWNERSCLUB sticker overlay.  I'm sure the rest is pretty self-explanatory!
   
   
6. TAKE YOUR TIME WITH ALL STEPS ABOVE & YOU WILL HAVE NO ISSUES! :) 

This product is in no way affiliated or endorsed with/by Ford.